SPECIFICATIONS
& DIMENSIONS
CAPACITY
1000 LBS
2500 LBS

Hydraulic Unit H.P.:
7-1/2 H.P.
10 H.P.
Max. Operaing Pressure :

1000 P.S.I.

1000 P.S.I.

"A" - Minimum Daylight :
10"
8"
"B" - Maximum Daylight :
28-1/2"
35-1/2"
"C" - Roll In / Out Height :
24"
29-1/2"
"D" - Machine Height :
73-1/2"
93"
"E" - Rollover Clearance :
75"
96"
"F" - In to Out :
71"
114-5/8"
"G" - Frame Length :
112"
164-1/8"
"H" - Frame Width :
42-3/4"
51"
"J" - Anchor Bolt Hole :
100"
166-5/8'
"K" - Anchor Bolt Hole :
41-3/4"
49"
"L" - Anchor Bolt Hole Dia. :
1"
1-1/8"
"M" - Retainer Clearance :
30" Max.
20" Min.
42" Max.
26" Min.
"N" - Conveyor Section Length :
60" Max.
28" Min.
72" Max.
44" Min.
"O" - Maximum Open :
30"
41"
"P" - Minimum Open :
20"
21"

The positive cycloid motion allows simultaneous roll and transfer of the mold and/or cores onto the conveyor set-out lines.
Then, the cycloid rollover returns the core box or molding box back to the molding system for re-use.
Roll-in and roll-out conveyors are standard; their arrangement is optional (see diagram below).
Bottom board feeders and power rolls can be added if required.

Optional Arrangments for Roll-In & Roll-Out Conveyors